Menu
0
    0

    Your Cart is Empty

    Festool Tools

    Cordless Combo Kits

  • Cordless Combo Kits

  • Festool Accessories

    Hand Abrasives

  • Hand Abrasives

  • Shaper

    Origin Router

    Dovetail Bit

    Clearing Bit

    Connected Caliper

  • Origin Router

  • Dovetail Bit

  • Clearing Bit

  • Connected Caliper

  • SawStop

    Compact Table Saw

    Brake Cartridge

  • Compact Table Saw

  • Brake Cartridge

  • Snickers Workwear

    Slim Fit Trousers

    Fleece Jacket

    Tool Vest

    Kneepads

  • Slim Fit Trousers

  • Fleece Jacket

  • Tool Vest

  • Kneepads

  • Festool 498979 Router Bit Box Set 10PCS
    Festool 498979 Router Bit Box Set 10PCS
    Festool 498979 Router Bit Box Set 10PCS
    Festool 498979 Router Bit Box Set 10PCS
    Festool 498979 Router Bit Box Set 10PCS

    Festool 498979 Router Bit Box Set 10PCS

    $299.00
    New! Ships: Immediately
    • Router bit set (8mm shank bits)
    • All bits have carbide blades and are suitable for wood
    • Ten cutters which are securely stored in a clearly organized way and can be easily removed

     

    Edge Trimming Bit (#491027)

    D = 12.7mm, NL = 25mm

    Cylindrical cutter for routing with templates. Edge trimming cutter with ball bearing below - this allows coatings in and on panel edges to be flush cut. Because of the small ball bearing, even inner radii of 15 mm can be flush cut.

    Dowel Drilling Bit (#491066)

    D = 5mm, NL = 30mm

    A special cutter for dowel drillings in conjunction with a router. Thanks to its geometry, it is perfectly suited to high speeds. With brad point. The centring point offers the cutter very good guidance. In conjunction with the hole drilling system, a series of drill holes is quickly and easily created.

    Groove Cutting Bit (#490959)

    D = 10mm, NL = 20mm

    With hard-wearing drill point. Ideal for cutting grooves, rebating and long-hole routing, and working with templates.

    Groove Cutting Bit (#490969)

    D = 18mm, NL = 30mm

    With hard-wearing drill point. Ideal for cutting grooves, rebating and long-hole routing, and working with templates.

    Roundover Bit (#491009)

    D = 16.7mm, NL = 9mm, R = 2mm

    Can be used with a 12.7mm ball bearing for rounding and with a 9.5mm ball bearing for routing a decorative cornice.

    Roundover Bit (#491013)

    D = 25.5mm, NL = 13.5mm, R = 6.35mm

    Can be used with a 12.7mm ball bearing for rounding and with a 9.5mm ball bearing for routing a decorative cornice.

    Roundover Bit (#491015)

    D = 31.7mm, NL = 16.5mm, R = 9.5mm

    Can be used with a 12.7mm ball bearing for rounding and with a 9.5mm ball bearing for routing a decorative cornice.

    45-degree Chamfer Bit (#491025)

    D = 36mm, NL = 11.5mm

    With 12.7 mm ball bearing. Chamfer cutter can be used with or without a ball bearing.

    Slot Cutting Bit (#491059)

    D = 40mm, d = 6mm, NL = 4mm

    For use either without ball bearing, or with a ball bearing of 16mm or 28mm.

    15-degree Dovetail Bit (#490992)

    D = 13.8mm, NL = 13.5mm

    For producing a semi-covered dovetail joint SZ 14.